GeoTechGuide

YKS DIY 250 Racing Quadcopter Full Carbon Fiber Frame Kit ARF with Camera

Specifications:
Quadcopter Frame: Full carbon fiber 250 quadcopter frame (AFR)
Motor: HobbyWing 1806
ESC: HobbyWing 12A Simonk (5V BEC)
Battery: Lion power 1500mAh
Image Transmission: 5.8G 600mw
Propeller: 5030 carbon fiber propeller
Flight Controller: CC3D
Camera: 700 Line HD NTSC
Package Dimensions: 29 × 17 × 5cm

Note: This product does not suitable for children under 14 years old and new hand.

Package Includes:
1 × 250 Quadcopter Frame Kit
4 × Motor
4 × ESC
1 × Image Transmission
1 × Battery
4 × 5030 Propeller
1 × CC3D
1 × Distributor Plate
1 × Camera
2 × XT60 Plug (BNC)
1 × Shrinkable Tube
15 × Banana Plug (BNC)
1 × Velcro Cable Tie
10 × Nylon Cable Ties

Product Features

  • Full Carbon Fiber frame kit, which is ultralight and great intensity.
  • Bundled with 5.8G 600mw image transmission and 700 line HD NTSC camera.
  • Bundled with HobbyWing 1806 motor and electronic speed controller (ESC).
  • Equipped with rubber damper, high quality and strong ability of shock absorption.
  • YKS DIY 250 Quadcopter Kit: Includes 250 AFR RC quadcopter and other necessary components and parts; it is ready to fly after you assembled all the components and parts (included) and plug the battery (included).
  • Ralph L. Irons says:
    2016-06-20 at 2:17 am

    We couldn’t resist indoor testing when the weather was bad. The batteries charged up and powered each craft … As part of a STEM project, some of my students (high school seniors) were divided into two groups, each group buildinga YKS 250 FPV quadcopter. The YKS kits were purchased from the Elect&Small2 Amazon store, together with aspare frame kit just in case. Prior to the project’s start, I had built one of the same kits obtained at a higher price from another seller.All the purchased YKS kits were complete, and everything worked.The frame went together with…

    Reply
  • Zach S says:
    2016-06-20 at 2:30 am

    You can pick those up at a local hobby store or order a set on line (something like these: http The product arrived with all components except a few screw posts to hold the flight controller in place. You can pick those up at a local hobby store or order a set on line (something like these: http://www.amazon.com/Nickys-Gift-Quadcpter-Hardware-Screws/dp/B019PUK1M2/ref=sr_1_8?s=toys-and-games&ie=UTF8&qid=1452268137&sr=1-8&keywords=screw+posts+for+quadcopter.One) motor failed a day in that we had to replace. The frame was easy to assemble with the instructions included, but there…

    Reply
  • Anonymous says:
    2016-06-20 at 2:30 am

    This is a nearly-complete kit to build a 250-class racing quadcopter (a “ZMR 250” clone, according to what I could find on-line). As expected, it doesn’t include a receiver (or transmitter): If you already have a transmitter, you’ll presumably pick a received that matches; if not, you’ll have to buy both (I recommend FrSky’s system, but there are many other options — FlySky is a popular budget-friendly solution). Also as expected, this does not include video reception hardware,…

    Reply
    • >